Product Deep Dive FAQ’s Reviews
MOPHEAD | Wet Mop
MOPHEAD | Wet Mop
MOPHEAD | Wet Mop
MOPHEAD | Wet Mop
MOPHEAD | Wet Mop

MOPHEAD | Wet Mop

From coffee spills to muddy footprints, wet mop it all away in one smooth, self-gliding pass.

4.7
(18 reviews)
Sale priceRs. 5,999 Regular priceRs. 7,999
25% Off
25% OFF

MRP incl. of all taxes

Features

Delivery Date

Product
Technical Specs
Test Reports
About the Product

Transform your NUUK REN PRO into a powerful 2-in-1 wet and dry floor cleaner with the MopHead™ wet mop attachment. Built for all types of hard floors, it sweeps and mops in a single glide, lifting dry debris while wiping away liquid spills, food drops, muddy footprints and sticky stains for spotless, streak-free results with no repeat passes. Smart controlled water dispersion releases only as much water as the roller absorbs back to prevent over-wetting and streaking, while the 1500 rpm motorised self-gliding roller powers through stubborn stains with even pressure and zero effort. Separate sealed 180 ml clean and 250 ml dirty water tanks keep every stroke hygienic with no cross-contamination, and a smart sensor alerts you when it's time to empty. With a 270° flexible joint for easy maneuverability, magnetic snap-on roller for quick setup, and durability tested up to 1400 cycles, MopHead™ makes mopping kitchens, bathrooms, pet messes and post-party spills effortless. Compatible with the NUUK REN PRO cord-free vacuum cleaner.

Product Details

Product Details
Product Name: NUUK MopHead™ – Wet Mop Attachment for REN PRO
Motor Manufacturer Model: CRS-555PH-3161

Motor Specifications
Motor Speed: 1500 rpm ± 10%

Overall Machine Rating
Rated Voltage / Frequency: 29.6 V
Rated Current: 1.5 A ± 0.2 A
Rated Power: 45 W ± 5 W

Water Tank Capacity
Clean Water Tank: 180 ± 10 mL
Sewage Tank: 300 ± 30 mL
Sewage Tank Full-Water Detection: Water level sensor board (300 mL calibration)

Water Pump Parameters
Pump Manufacturer Model: DL19-02
Rated Voltage / Frequency: 5 V
Rated Water Output: 250 – 350 mL/min
Water Pump Control Logic: 15 g output (3 s) after startup, then 10 g ± 2 g/min

Brush & Flow Performance
Brush Roller Rotation Speed: 600 rpm ± 100 rpm
Whole Machine Water Flow: 10 g ± 2 g/min
Whole Bottle Water Usage Time: 15 min ± 2 min
Temperature Rise: ≤ 65 K

Life & Weight
Life: ≥ 350 H

Dimensions & Packaging
Overall Dimensions: 250 × 245 × 100 mm

Noise, Protection & Fault Handling
Overall Machine Noise / Sound Power: < 70 dBA
Floor Brush Stall Protection: Software protection (current value: 4A1S)
Fault Code Information: Determined based on logical specifications

Test Reports

Ren Pro_Wet Mop Surface Area Coverage_Report No.: NEU_VC_2715_03_001

Surface Area covered by the RenPro Wet Mop on a single battery charge is approx. 2,970 sq. ft. (≈3,000 sq. ft.), tested using continuous forward strokes across a marked 330 sq. ft. area (55 ft × 6 ft) until the device automatically shut down. Total coverage is based on covering 330 sq. ft. nine times. Observed Run Time: 37 minutes.

Test Environment: Dry Concrete (Cemented) Floor, forward stroke only, 220 mm roller width.

Data reported by Nuuk Lab.

Ren Pro_Wet Mop Water Tank Coverage_Report No.: NEU_VC_2715_04_001

Clean Water Tank of the RenPro Wet Mop runs dry after 13–14 minutes of operation, having covered approximately 980 sq. ft., after which a refill is required to continue mopping.

Test Environment: Dry Concrete (Cemented) Floor, forward stroke only.

Data reported by Nuuk Lab.

Ren Pro_Wet Mop Home Coverage Guide_Report No.: NEU_VC_2715_05_001

Based on coverage testing, a 1 BHK (500–650 sq. ft.) and a 2 BHK (800–1,000 sq. ft.) are both cleaned comfortably within a single water-tank cycle (13–14 mins), with the 2 BHK close to the ~980 sq. ft. limit. A 3 BHK (1,200–1,500 sq. ft.) will likely need one water refill mid-clean, though it stays well within the single-charge battery limit (~3,000 sq. ft.).

Data reported by Nuuk Lab.

From real nooks that love REN PRO