If your Nuuk FŌLDE is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

This may be because your Nuuk FŌLDE is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk FŌLDE for 4 hours.

It is possible that the Nuuk FŌLDE has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

Don't worry at all. This is a battery optimisation feature. If you want to see the battery status again, just press the red button and you'll be able to see the charge level of your fan.

Ensure that the power cord is securely plugged into the fan. Please also double-check that the mains voltage matches the specifications listed on the fan's rating label.

Give it some solid ground to stand on – a flat, level surface is key. Also, keep foreign objects far away from the air inlet and outlet – they might be causing the ruckus.

It is possible that the Nuuk HĀLO has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling. A flat, level surface is key.

If you’ve lost the remote, don’t worry. The HĀLO has a touch panel that can easily be used to control the fan. If it’s feeling a bit sluggish, it sounds like it's time to check the battery. Your remote is powered by a CR2025 button cell. Flip that remote, pop open the battery compartment, and slide out the battery tray. Swap in a fresh CR2025, ensuring you match the polarity. Snap that tray shut, and you're back in business.

If your Nuuk LĪT is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

Steps To use LĪT remote: Step 1: Press and hold power switch on the fan head for 2 seconds, the remote can only be used after the fan is switched on manually. Step 2: Make sure the PET film is removed from the remote. Step 3: Point the remote towards the fan head and is in the workable distance i.e. Less than 3 metres. Also ensure that there is no obstruction between the fan and remote. If you switch off the Nuuk LĪT from the power button at any point, you will need to press the power button again to ensure that the remote functions as normal.

This may be because your Nuuk LĪT is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk LĪT for 6 hours.

It is possible that the Nuuk LĪT has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

If your Nuuk FŌLDE is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

This may be because your Nuuk FŌLDE is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk FŌLDE for 4 hours.

It is possible that the Nuuk FŌLDE has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

Don't worry at all. This is a battery optimisation feature. If you want to see the battery status again, just press the red button and you'll be able to see the charge level of your fan.

Ensure that the power cord is securely plugged into the fan. Please also double-check that the mains voltage matches the specifications listed on the fan's rating label.

Give it some solid ground to stand on – a flat, level surface is key. Also, keep foreign objects far away from the air inlet and outlet – they might be causing the ruckus.

It is possible that the Nuuk HĀLO has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling. A flat, level surface is key.

If you’ve lost the remote, don’t worry. The HĀLO has a touch panel that can easily be used to control the fan. If it’s feeling a bit sluggish, it sounds like it's time to check the battery. Your remote is powered by a CR2025 button cell. Flip that remote, pop open the battery compartment, and slide out the battery tray. Swap in a fresh CR2025, ensuring you match the polarity. Snap that tray shut, and you're back in business.

If your Nuuk LĪT is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

Steps To use LĪT remote: Step 1: Press and hold power switch on the fan head for 2 seconds, the remote can only be used after the fan is switched on manually. Step 2: Make sure the PET film is removed from the remote. Step 3: Point the remote towards the fan head and is in the workable distance i.e. Less than 3 metres. Also ensure that there is no obstruction between the fan and remote. If you switch off the Nuuk LĪT from the power button at any point, you will need to press the power button again to ensure that the remote functions as normal.

This may be because your Nuuk LĪT is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk LĪT for 6 hours.

It is possible that the Nuuk LĪT has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

If your Nuuk FŌLDE is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

This may be because your Nuuk FŌLDE is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk FŌLDE for 4 hours.

It is possible that the Nuuk FŌLDE has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

Don't worry at all. This is a battery optimisation feature. If you want to see the battery status again, just press the red button and you'll be able to see the charge level of your fan.

Ensure that the power cord is securely plugged into the fan. Please also double-check that the mains voltage matches the specifications listed on the fan's rating label.

Give it some solid ground to stand on – a flat, level surface is key. Also, keep foreign objects far away from the air inlet and outlet – they might be causing the ruckus.

It is possible that the Nuuk HĀLO has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling. A flat, level surface is key.

If you’ve lost the remote, don’t worry. The HĀLO has a touch panel that can easily be used to control the fan. If it’s feeling a bit sluggish, it sounds like it's time to check the battery. Your remote is powered by a CR2025 button cell. Flip that remote, pop open the battery compartment, and slide out the battery tray. Swap in a fresh CR2025, ensuring you match the polarity. Snap that tray shut, and you're back in business.

If your Nuuk LĪT is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

Steps To use LĪT remote: Step 1: Press and hold power switch on the fan head for 2 seconds, the remote can only be used after the fan is switched on manually. Step 2: Make sure the PET film is removed from the remote. Step 3: Point the remote towards the fan head and is in the workable distance i.e. Less than 3 metres. Also ensure that there is no obstruction between the fan and remote. If you switch off the Nuuk LĪT from the power button at any point, you will need to press the power button again to ensure that the remote functions as normal.

This may be because your Nuuk LĪT is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk LĪT for 6 hours.

It is possible that the Nuuk LĪT has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

If your Nuuk FŌLDE is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

This may be because your Nuuk FŌLDE is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk FŌLDE for 4 hours.

It is possible that the Nuuk FŌLDE has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

Don't worry at all. This is a battery optimisation feature. If you want to see the battery status again, just press the red button and you'll be able to see the charge level of your fan.

Ensure that the power cord is securely plugged into the fan. Please also double-check that the mains voltage matches the specifications listed on the fan's rating label.

Give it some solid ground to stand on – a flat, level surface is key. Also, keep foreign objects far away from the air inlet and outlet – they might be causing the ruckus.

It is possible that the Nuuk HĀLO has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling. A flat, level surface is key.

If you’ve lost the remote, don’t worry. The HĀLO has a touch panel that can easily be used to control the fan. If it’s feeling a bit sluggish, it sounds like it's time to check the battery. Your remote is powered by a CR2025 button cell. Flip that remote, pop open the battery compartment, and slide out the battery tray. Swap in a fresh CR2025, ensuring you match the polarity. Snap that tray shut, and you're back in business.

If your Nuuk LĪT is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

Steps To use LĪT remote: Step 1: Press and hold power switch on the fan head for 2 seconds, the remote can only be used after the fan is switched on manually. Step 2: Make sure the PET film is removed from the remote. Step 3: Point the remote towards the fan head and is in the workable distance i.e. Less than 3 metres. Also ensure that there is no obstruction between the fan and remote. If you switch off the Nuuk LĪT from the power button at any point, you will need to press the power button again to ensure that the remote functions as normal.

This may be because your Nuuk LĪT is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk LĪT for 6 hours.

It is possible that the Nuuk LĪT has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

If your Nuuk FŌLDE is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

This may be because your Nuuk FŌLDE is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk FŌLDE for 4 hours.

It is possible that the Nuuk FŌLDE has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

Don't worry at all. This is a battery optimisation feature. If you want to see the battery status again, just press the red button and you'll be able to see the charge level of your fan.

Ensure that the power cord is securely plugged into the fan. Please also double-check that the mains voltage matches the specifications listed on the fan's rating label.

Give it some solid ground to stand on – a flat, level surface is key. Also, keep foreign objects far away from the air inlet and outlet – they might be causing the ruckus.

It is possible that the Nuuk HĀLO has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling. A flat, level surface is key.

If you’ve lost the remote, don’t worry. The HĀLO has a touch panel that can easily be used to control the fan. If it’s feeling a bit sluggish, it sounds like it's time to check the battery. Your remote is powered by a CR2025 button cell. Flip that remote, pop open the battery compartment, and slide out the battery tray. Swap in a fresh CR2025, ensuring you match the polarity. Snap that tray shut, and you're back in business.

If your Nuuk LĪT is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

Steps To use LĪT remote: Step 1: Press and hold power switch on the fan head for 2 seconds, the remote can only be used after the fan is switched on manually. Step 2: Make sure the PET film is removed from the remote. Step 3: Point the remote towards the fan head and is in the workable distance i.e. Less than 3 metres. Also ensure that there is no obstruction between the fan and remote. If you switch off the Nuuk LĪT from the power button at any point, you will need to press the power button again to ensure that the remote functions as normal.

This may be because your Nuuk LĪT is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk LĪT for 6 hours.

It is possible that the Nuuk LĪT has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

If your Nuuk FŌLDE is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

This may be because your Nuuk FŌLDE is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk FŌLDE for 4 hours.

It is possible that the Nuuk FŌLDE has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

Don't worry at all. This is a battery optimisation feature. If you want to see the battery status again, just press the red button and you'll be able to see the charge level of your fan.

Ensure that the power cord is securely plugged into the fan. Please also double-check that the mains voltage matches the specifications listed on the fan's rating label.

Give it some solid ground to stand on – a flat, level surface is key. Also, keep foreign objects far away from the air inlet and outlet – they might be causing the ruckus.

It is possible that the Nuuk HĀLO has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling. A flat, level surface is key.

If you’ve lost the remote, don’t worry. The HĀLO has a touch panel that can easily be used to control the fan. If it’s feeling a bit sluggish, it sounds like it's time to check the battery. Your remote is powered by a CR2025 button cell. Flip that remote, pop open the battery compartment, and slide out the battery tray. Swap in a fresh CR2025, ensuring you match the polarity. Snap that tray shut, and you're back in business.

If your Nuuk LĪT is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

Steps To use LĪT remote: Step 1: Press and hold power switch on the fan head for 2 seconds, the remote can only be used after the fan is switched on manually. Step 2: Make sure the PET film is removed from the remote. Step 3: Point the remote towards the fan head and is in the workable distance i.e. Less than 3 metres. Also ensure that there is no obstruction between the fan and remote. If you switch off the Nuuk LĪT from the power button at any point, you will need to press the power button again to ensure that the remote functions as normal.

This may be because your Nuuk LĪT is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk LĪT for 6 hours.

It is possible that the Nuuk LĪT has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

If your Nuuk FŌLDE is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

This may be because your Nuuk FŌLDE is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk FŌLDE for 4 hours.

It is possible that the Nuuk FŌLDE has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

Don't worry at all. This is a battery optimisation feature. If you want to see the battery status again, just press the red button and you'll be able to see the charge level of your fan.

Ensure that the power cord is securely plugged into the fan. Please also double-check that the mains voltage matches the specifications listed on the fan's rating label.

Give it some solid ground to stand on – a flat, level surface is key. Also, keep foreign objects far away from the air inlet and outlet – they might be causing the ruckus.

It is possible that the Nuuk HĀLO has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling. A flat, level surface is key.

If you’ve lost the remote, don’t worry. The HĀLO has a touch panel that can easily be used to control the fan. If it’s feeling a bit sluggish, it sounds like it's time to check the battery. Your remote is powered by a CR2025 button cell. Flip that remote, pop open the battery compartment, and slide out the battery tray. Swap in a fresh CR2025, ensuring you match the polarity. Snap that tray shut, and you're back in business.

If your Nuuk LĪT is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

Steps To use LĪT remote: Step 1: Press and hold power switch on the fan head for 2 seconds, the remote can only be used after the fan is switched on manually. Step 2: Make sure the PET film is removed from the remote. Step 3: Point the remote towards the fan head and is in the workable distance i.e. Less than 3 metres. Also ensure that there is no obstruction between the fan and remote. If you switch off the Nuuk LĪT from the power button at any point, you will need to press the power button again to ensure that the remote functions as normal.

This may be because your Nuuk LĪT is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk LĪT for 6 hours.

It is possible that the Nuuk LĪT has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

If your Nuuk FŌLDE is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

This may be because your Nuuk FŌLDE is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk FŌLDE for 4 hours.

It is possible that the Nuuk FŌLDE has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

Don't worry at all. This is a battery optimisation feature. If you want to see the battery status again, just press the red button and you'll be able to see the charge level of your fan.

Ensure that the power cord is securely plugged into the fan. Please also double-check that the mains voltage matches the specifications listed on the fan's rating label.

Give it some solid ground to stand on – a flat, level surface is key. Also, keep foreign objects far away from the air inlet and outlet – they might be causing the ruckus.

It is possible that the Nuuk HĀLO has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling. A flat, level surface is key.

If you’ve lost the remote, don’t worry. The HĀLO has a touch panel that can easily be used to control the fan. If it’s feeling a bit sluggish, it sounds like it's time to check the battery. Your remote is powered by a CR2025 button cell. Flip that remote, pop open the battery compartment, and slide out the battery tray. Swap in a fresh CR2025, ensuring you match the polarity. Snap that tray shut, and you're back in business.

If your Nuuk LĪT is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

Steps To use LĪT remote: Step 1: Press and hold power switch on the fan head for 2 seconds, the remote can only be used after the fan is switched on manually. Step 2: Make sure the PET film is removed from the remote. Step 3: Point the remote towards the fan head and is in the workable distance i.e. Less than 3 metres. Also ensure that there is no obstruction between the fan and remote. If you switch off the Nuuk LĪT from the power button at any point, you will need to press the power button again to ensure that the remote functions as normal.

This may be because your Nuuk LĪT is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk LĪT for 6 hours.

It is possible that the Nuuk LĪT has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

If your Nuuk FŌLDE is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

This may be because your Nuuk FŌLDE is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk FŌLDE for 4 hours.

It is possible that the Nuuk FŌLDE has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.

Don't worry at all. This is a battery optimisation feature. If you want to see the battery status again, just press the red button and you'll be able to see the charge level of your fan.

Ensure that the power cord is securely plugged into the fan. Please also double-check that the mains voltage matches the specifications listed on the fan's rating label.

Give it some solid ground to stand on – a flat, level surface is key. Also, keep foreign objects far away from the air inlet and outlet – they might be causing the ruckus.

It is possible that the Nuuk HĀLO has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling. A flat, level surface is key.

If you’ve lost the remote, don’t worry. The HĀLO has a touch panel that can easily be used to control the fan. If it’s feeling a bit sluggish, it sounds like it's time to check the battery. Your remote is powered by a CR2025 button cell. Flip that remote, pop open the battery compartment, and slide out the battery tray. Swap in a fresh CR2025, ensuring you match the polarity. Snap that tray shut, and you're back in business.

If your Nuuk LĪT is not turning on it may be because it is not charged. In this case, use any Type-C charger to recharge the fan and try turning it on again after it is sufficiently charged.

Steps To use LĪT remote: Step 1: Press and hold power switch on the fan head for 2 seconds, the remote can only be used after the fan is switched on manually. Step 2: Make sure the PET film is removed from the remote. Step 3: Point the remote towards the fan head and is in the workable distance i.e. Less than 3 metres. Also ensure that there is no obstruction between the fan and remote. If you switch off the Nuuk LĪT from the power button at any point, you will need to press the power button again to ensure that the remote functions as normal.

This may be because your Nuuk LĪT is off or because the battery is not charged. Try turning it on by pressing the power button on the fan. If it is still not turning on, try putting it on charge using any Type-C cable. After it is sufficiently charged try turning it on again.

For a full charge you should charge your Nuuk LĪT for 6 hours.

It is possible that the Nuuk LĪT has been placed on an uneven surface or there is something stuck on the bottom of the fan that is causing the imbalance. Check the surface it is placed on and the base of the fan and make sure they are clear and level to ensure wobble-free cooling.